US site
The Next Wave Ethernet Switch for Data Center and Cloud Computing
The QuantaMesh T7032-IX1 is a high performance and low latency layer 2/3/4 Ethernet switch with 32 100GbE QSFP28 ports in a 1U form factor. Each 100G QSFP28 port can be independently configured to support 10/25/40/50/100GbE speed and can support up to 128 10/25G connections or 64 50G connections via split out cables. Built for infrastructure-as-a-service (Iaas) data center deployment, high performance computing clusters, and financial applications, the QuantaMesh T7032-IX1 – with its very high port density and high performance as well as ultra-low latency characteristic – is idea for demanding workloads and provides optimal TCO.
Automation
With the rapid adoption of cloud computing and the proliferation of big data and parallel calculations, the need for data center network devices is growing exponentially, making network automation a critical factor. Supporting auto installation, RESTful, Ansible and PSME (Pooled System Managment Engine), T7032-IX1 facilities easy deployment to build-up a mass data center with infrastructure-as-a-Service (IaaS).
Virtualization
Network virtualization is becoming an important topic of data centers. QuantaMesh T7032-IX1 offers a hardware-based VXLAN to support virtual machine mobility. Not limited by 4K VLANs, VXLAN enables network scale-out across L3 subnets and can support up to 16.7M possible virtual networks.
High Availability
The QuantaMesh T7032-IX1 is designed for high availability from both hardware and software perspectives. The key features include:
1+1 hot-swappable power supplies
N+1 hot-swappable fans
Spanning Tree with Guarding Features
Up to 64 Groups of LACP with per Group 32 Member Ports
ulti-chassis Link Aggregation (MLAG)
Up to 48 paths ECMP routing for load balancing and redundancy
Virtual Router Redundancy Protocol (VRRP)
| Physical ports | |
|---|---|
| Port configuration | 32 QSFP28 ports |
| Management Port | Out-of-band management port (RJ-45, 10/100/1000BASE-T) |
| Console Port | 1 (RJ-45) |
| USB | 1 (v2.0) |
| Performance | |
|---|---|
| Switching capacity | 6.4Tbps |
| Maximum forwarding rate | 3.3Bpps |
| Latency | <450ns |
| Major Components | |
|---|---|
| ASIC | Broadcom StrataXGS Tomahawk |
| CPU | Intel ATOM Processors |
| Memory | 8GB DDR3/ECC |
| Storage | 32G SSD |
| Layer 2 Features | |
|---|---|
| Switching Mode | Store-and-Forward |
| Spanning Tree | 802.1w 802.1s Auto Edge |
| VLAN | IEEE 802.1Q Tagged Base Port-Based QinQ (802.1ad) |
| Storm Control | Broadcast Unknown Multicast DLF (Unknown Unicast) |
| IGMP Snooping | v1/v2/v3 v1/v2 Querier Immediate Leave |
| Link Aggregation | 802.3ad with LACP Static Trunk Unicast/Multicast Traffic Balance over Trunking Port LACP Fallback |
| Link State | |
| Port Backup | |
| Loopback Detection | |
| Private VLAN | |
| QoS Features | |
|---|---|
| Scheduling for priority queue | WRR, Strict, Hybrid |
| COS | 802.1p IP TOS precedence DSCP |
| DiffServ | |
| iSCSI optimization | |
| Security Features | |
|---|---|
| Static and dynamic port security (MAC-based) | |
| 802.1x | MAC-based Port-based Auto VLAN assignment Guest VLAN Unauthenticated VLAN |
| Access Control List | L2/L3/L4 |
| IPv6 ACL | L3/L4 |
| RADIUS | Authentication, Authorization, Accounting |
| TACACS+ | Authentication |
| SSH 1.5/V2.0 | |
| User name and password | Local Authentication Remote Authentication via RADIUS/TACACS+ AAA |
| Management IP filtering | SNMP Telnet SSH |
| IP Source Guard | |
| Dynamic ARP inspection (DAI) | |
| DHCP snooping | |
| Control Plane Policing / CoPP | |
| Service Prohibit Access | |
| Role Base Access Control (RBAC) | |
| Layer 3 Features | |
|---|---|
| IP Multinetting/CIDR | |
| /31 subnets | |
| Proxy ARP | |
| Static route | IPv4 IPv6 |
| OSPF v2/v3 | |
| ECMP | |
| BGP4 | |
| IGMP v1/v2/v3 | |
| PIM-SM/-SM6 | |
| MLD v1/v2 | |
| VRRP v2 | |
| Policy-Based Routing (PBR) | |
| BFD | |
| VRF Lite | |
| Management Features | |
|---|---|
| Industrial standard command-line interface | |
| CLI filtering | |
| CLI schedule | |
| Telenet/SSH | |
| Software Update | TFTP FTP SCP SFTP |
| Configuration Update | TFTP FTP SCP SFTP |
| Dual Images | |
| SNMP v1/v2c/v3 | |
| SNMP inform v2 | |
| RMON1 Groups: 1, 2, 3 & 9 | |
| BOOTP | client/relay |
| DHCP client | |
| DHCP relay | |
| DNS client | |
| DNS relay | |
| Remote PING | |
| Traceroute | |
| NTPv4 | |
| LLDP | 802.1ab 802.MED Potential error detection |
| UDLD | |
| Port mirroring | SPAN RSPAN |
| sFlow v5 | |
| Email alerting | SMTP |
| Error-Disable Recovery | |
| Fluentd | |
| IPv6 Management | |
|---|---|
| IPv4/IPv6 Dual Protocol Stack | |
| ICMPv6 | |
| ICMPv6 Redirect | |
| IPv6 Neighbor Discovery | |
| Stateless Autoconfiguration | |
| Manual Configuration | |
| DHCPv6 | |
| SNMP over IPv6 | |
| SSH over IPv6 | |
| IPv6 Telnet Support | |
| IPv6 DNS Resolver | |
| IPv6 RADIUS Support | |
| IPv6 TACACS+ Support | |
| IPv6 Syslog Support | |
| IPv6 SNTP Support | |
| IPv6 TFTP Support | |
| High Availability | |
|---|---|
| Multi-Chassis Link Aggregation (MLAG) | |
| Data Center Features | |
|---|---|
| Enhanced Transmission Selection (802.1Qaz) | |
| Priority-based Flow Control (802.1Qbb) | |
| DCBX | DCBX for ETS DCBX for PFC |
| FCoE Initiation Protocol (FIP) snooping | |
| Automation | |
|---|---|
| Auto installation | |
| RESTful API | |
| Ansible | |
| Pooled System Management Engine (PSME) | |
| Virtualization Features | |
|---|---|
| VXLAN | |
| Mechanical | |
|---|---|
| Dimension (HxWxD) | 44 x 440 x 508mm |
| Weight | 9.27kg (NET) |
| Environmental Specifications | |
|---|---|
| Operating temperature | 0~45°C |
| Operating humidity | 90% maximum relative humidity |
| Electrical | |
|---|---|
| Power requirement | 100~240VAC, 50/60Hz |
| Power consumption | 378 watts |
| Safety | |
|---|---|
| Safety | UL, cUL, CB |
| EMC | |
|---|---|
| EMC | CE, FCC, VCCI, CCC |
| RoHS | |
|---|---|
| RoHS | Reduction of Hazardous Substances (RoHS) 6 |
| Supported Optics and Cables | |
|---|---|
| Supported Optics and Cables | DAC cable (QSFP+): 1m, 3m, and 5m DAC cable (QSFP+, fan-out): 1m, 3m, and 5m DAC cable (QSFP28): 1m, 3m, and 5m DAC cable (QSFP28, fan-out): 3m AOC cable (QSFP+, 850nm, MMF): 7m and 10m AOC cable (QSFP28, 850m, MMF): 1m, 3m, 5m, and 10m 40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4 40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4 100G optic (QSFP28, MPO, 850nm, MMF): 100GBASE-SR4 100G optic (QSFP28, MPO, 1310nm, SMF): 100GBASE-PSM4 100G optic (QSFP28, LC, 1310nm, SMF): 100GBASE-LR4 |
| Order Information | |
|---|---|
| Order Information | T7032-IX1 (1IX1UZZ0STM) Front to Back, with Rail Kit T7032-IX1 (1IX1UZZ0STN) Back to Front, with Rail Kit PSU - Red (1HY9ZZZ071Y) (F-2-B, AC, 750W) PSU - Blue (1HY9ZZZ0720) (B-2-F, AC, 750W) FAN Module (1HY9ZZZ0721) (F-2-B) FAN Module (1HY9ZZZ0722) (B-2-F) |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| QuantaMesh_T7032-IX1_DS | 1 | 3/8/20 | 231KB |  |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| HS Product Catalog | 1 | 3-8-20 | 6371KB | |
| Title | Version | Date | Size | |
|---|---|---|---|---|
| Safety Information | 1 | 01-10-20 | 295KB | |
T7032-IX1
The Next Wave Ethernet Switch for Data Center and Cloud Computing
- 100G Ethernet Switch
- VXLAN
- Multi-Chassis Link Aggregation (MLAG)
- OSPF, BGP4 with ECMP
- Network Automation
-
$AUD $17,559.80
*RRP Pricing*To View Channel Discounts Please Login
