T1048-LB9

QuantaMesh 1000 Series T1048-LB91G/10G Datacenter & Enterprise-Class Ethernet switchThe QuantaMesh T1048-LB9 is a high performance layer 2/3/4 Ethernet switch with 48 10Base-T/100Base-TX/1000Base-T ports and 4 dual s

QuantaMesh 1000 Series T1048-LB9

1G/10G Datacenter & Enterprise-Class Ethernet switch

The QuantaMesh T1048-LB9 is a high performance layer 2/3/4 Ethernet switch with 48 10Base-T/100Base-TX/1000Base-T ports and 4 dual speed 1GbE/10GbE SFP+ ports in a compact rack unit size.

Simplicity

The QuantaMesh T1048-LB9 can be managed through an industry standard command-line Interface (CLI) which reduces training and operating costs. A user friendly Web GUI is provided via a standard Web browser for switch management. The QuantaMesh T1048-LB9 also supports Simple Network Management Protocol (SNMP) both from standard MIB and private MIB for network administrator to easily configure, monitor, and manage operation remotely. The Auto-Installation feature implemented in the QuantaMesh T1048-LB9 helps centralized management to simplify deployment of a truly plug-and-play experience. With the evolution from IPv4 to IPv6, the QuantaMesh T1048-LB9 is a IPv6 integrated management device.

High Availability

The QuantaMesh T1048-LB9 is designed for high availability from both hardware and software perspective. The key features include:

  • 1+1 hot-swappable power supplies
  • Out-of-band management supported
  • 802.1D, 802.1w, and 802.1s supported
  • Up to 8 ports per link aggregation group (LACP) and up to 64 groups
  • Multi-chassis LAG for preventing the risks of single point failure
  • Up to 32 paths ECMP routing for load balancing and redundancy
  • Virtual Router Redundancy Protocol supported

High-Performance L2/L3 access deployments

With features like: 1) a compact 1U form factor, 2) high density 48 gigabit ports and 4 dual speed 1GbE/10GbE uplink ports, and 3) front to back and/or back to front airflow design, the QuantaMesh T1048-LB9 is ideal for enterprise campus or top-of-rack deployments. The 176Gbps switching capacity and 131Mpps forwarding rate enables high bandwidth connectivity to the aggregation or core layers and low power consumption make the QuantaMesh T1048-LB9 a powerful solution to aggregate data traffic and high-performance servers. The 4-port 10GbE density in a 1U height switch provides near 1:1 subscription ratio throughout the network. This allows organizations to deploy highly utilized networks and avoid congestion during peak hours.

Advanced IPv4 and IPv6 routing

The QuantaMesh T1048-LB9 is a fully layer 2 and layer 3 routing switch that supports advanced IPv4 and IPv6 routing features such as RIP v1/v2, OSPF, ECMP, RIPng and OSPFv3. The multicast routing features for IGMP v1/v2/v3, DVMRP, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6 are all supported in the QuantaMesh T1048-LB9.

About QCT

QCT (Quanta Cloud Technology) is a global datacenter solution provider extending the power of hyperscale datacenter design in standard and open SKUs to all datacenter customers.  Product lines include servers, storage, network switches, integrated rack systems and cloud solutions, all delivering hyperscale efficiency, scalability, reliability, manageability, serviceability and optimized performance for each workload.  QCT offers a full spectrum of datacenter products and services from engineering, integration and optimization to global supply chain support, all under one roof.  The parent of QCT is Quanta Computer Inc., a Fortune Global 500 technology engineering and manufacturing company.

  • BSMI--Taiwan--EMISafety
  • CB-EU
  • CCC-China
  • CE-EU
  • cUL (Canada) (Safety)
  • FCC-ClassA-US
  • RCM(AustraliaNew Zealand)
  • RoHS
  • VCCI-classA-Japan この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあります
  • WEEE-Mark


Physical ports
Port configuration
48 10/100/1000BASE-T and 4 1/10GbE SFP+ ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
Performance
Switching capacity
176Gbps
Maximum forwarding rate
131Mpps
Major Components
ASIC
Broadcom StrataXGS Firebolt3
CPU
PPC MPC8541
Layer 2 Features
Switching Mode
Store-and-Forward
Spanning Tree
802.1w
802.1s
Auto Edge
VLAN
IEEE 802.1Q Tagged Base
Port-Based
QinQ (802.1ad)
Storm Control
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
IGMP Snooping
v1/v2/v3
v1/v2 Querier
Immediate Leave
Link Aggregation
802.3ad with LACP
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
Link State
Port Backup
Loopback Detection
Private VLAN
QoS Features
Scheduling for priority queue
WRR, Strict, and Hybrid
COS
802.1p, IP TOS precedence, & DSCP
DiffServ
iSCSI optimization
Security Features
Static and dynamic port security (MAC-based)
802.1x
Port-based, MAC-based, auto VLAN assignment, guest VLAN, unauthenticated VLAN
Access Control List
L2/L3/L4
IPv6 ACL
L3/L4
RADIUS
Authentication, Authorization, Accounting
TACACS+
Authentication
SSH 1.5/V2.0
User name and password
Local Authentication, Remote Authentication via RADIUS/TACACS+, AAA
Management IP filtering
SNMP
Telnet
SSH
IP Source Guard
Dynamic ARP inspection (DAI)
DHCP snooping
IPv4
IPv6
Control Plane Policing / CoPP
Service Prohibit Access
Role Base Access Control (RBAC)
Layer 3 Features
IP Multinetting/CIDR
/31 subnets
Proxy ARP
Static route
IPv4
IPv6
OSPF v2/v3
ECMP
BGP4
IGMP v1/v2/v3
PIM-SM/-SM6
MLD v1/v2
VRRP v2
Policy-Based Routing (PBR)
Management Features
Industrial standard command-line interface
CLI filtering
CLI schedule
Telenet/SSH
Software Update
TFTP
FTP
SCP
SFTP
Configuration Update
TFTP
FTP
SCP
SFTP
Dual Images
SNMP v1/v2c/v3
SNMP inform v2
RMON1 Groups: 1, 2, 3 & 9
BOOTP
client/relay
DHCP client
DHCP relay
DNS client
DNS relay
Remote PING
Traceroute
NTPv4
LLDP
802.1ab
802.MED
Potential error detection
UDLD
Port mirroring
SPAN
RSPAN
sFlow v5
Email alerting
SMTP
Error-Disable Recovery
Fluentd
IPv6 Management
IPv4/IPv6 Dual Protocol Stack
ICMPv6
ICMPv6 Redirect
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Manual Configuration
DHCPv6
Relay
SNMP over IPv6
SSH over IPv6
IPv6 Telnet Support
IPv6 DNS Resolver
IPv6 RADIUS Support
IPv6 TACACS+ Support
IPv6 Syslog Support
IPv6 SNTP Support
IPv6 TFTP Support
High Availability
Multi-Chassis Link Aggregation (MLAG)
Automation
Auto installation
RESTful API
Ansible
Pooled System Management Engine (PSME)
SDN
OpenFlow
v1.3
Mechanical
Dimension (HxWxD)
42.8x435x393mm
Weight
7.15kg/ 15.76lbs (NET)
Environmental Specifications
Operating temperature
0~45°C
Operating humidity
90% maximum relative humidity
Electrical
Power requirement
100~240VAC, 50/60Hz
Power consumption
95 watts (L2 64B line rate;10G-SR optics, 100% fan duty)
Safety
Safety
UL, cUL, CB, BSMI, CCC
EMC
EMC
CE, FCC, VCCI, MSIP, CCC, RCM, Anatel
RoHS
RoHS
Reduction of Hazardous Substances (RoHS) 6
Supported Optics and Cables
Supported Optics and Cables
1000BASE-T: Cat 5e
DAC cable (SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5m
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
1G optic (SFP, LC, 850nm, MMF): 1000BASE-SR optic
1G optic (SFP, LC, 1310nm, SMF): 1000BASE-LR optic
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
Order Information
Order Information
T1048-LB9 (1LB9BZZ000F) (F-2-B, AC)
T1048-LB9 (1LB9BZZ000G) (B-2-F, AC)
PSU - Blue (1HY9ZZZ0061) (F-2-B, AC, 470W)
PSU - Green (1HY9ZZZ002P) (B-2-F, AC, 470W)

 

Datasheet 2
Title Version Date Size
QCT Product Portfolio v5.0 2015/06/18 271.97KB
QuantaMesh T1048-LB9 v2 2015/07/02 609KB
CATALOGUE 1
Title Version Date Size
HS Product Catalog 1 01-10-20 6371KB
User manual 2
Title Version Date Size
QuantaMesh Switch User Guide 1 2014/10/31 13.36MB
QuantaMesh T1048-LB9 Installation Guide 1 2015/07/02 123KB
Safety information 5
Title Version Date Size
Safety Information_EN for UL 2014/06/18 295KB
Safety Information_French for CUL. 2014/06/18
Safety Information_Russian_Language v1 2014/06/18
Safety Information_Simplify Chinese for CCC. 2014/06/18
Safety Information_Tranditional Chinese for BSMI. 2014/06/18
Supported Switch OS 1
Title Version Date Size
LB9 v1.4.17.00 image 1.4.17.00 2015/03/12 18.8MB

T1048-LB9

1G/10G Datacenter & Enterprise-Class Ethernet switch

  • MLAG, OSPF, BGP4, ECMP
  • OpenFlow Support
  • Network Automation
  • $AUD $4,018.25

    *RRP Pricing*

    To View Channel Discounts Please Login


System Configurator


Tags: T1048-LB9